Vehicles
Sections
143 not categorized PORSCHE 986 RACING CARSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1970-73 (includes uncategorized and accessory items) 0708007532
$75.90
Make a selection BK146351 Today, one cannot escape the fact that the words Porsche and racing go hand in hand. This book follows Porsche's year-by-year progress in top flight racing and rallying, and looks in detail at the pure competition cars that brought the German marque such immense success on the tracks and worldwide acclaim. This particular volume starts with the story of the pure racers of 1976 vintage, and takes the reader through a series of racing models, including the glorious 956 and 962, up to 2005 via contemporary photography and words from an acknowledged Porsche authority. An earlier volume covers the years up to 1975 inclusive. The book includes detailed year by year coverage of Porsche's top class racing and rallyin...(choose a part on the right to read more) General FitmentACCESSORY
$56.99
Make a selection FE03 Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There’s no worse feeling then watching your car burn to the ground without the ability to do anything about it. Unlike most fire extinguisher mounts available, all of rennline’s mounts install directly to the factory seats and do not compromise seat travel or leg room in anyway. Constructed from aircraft grade aluminum and meets all requirements for racing series or other organized track events. Designed to be used with most standard 2.5lb fire extinguishers, all hardware and installation instructions are included. Available for both power and manual seats. Fire extinguisher not included. General Fitment911 1994-98911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 944 1982-85 944 1985-88 944 1989-91
$149.00
Make a selection ER1T911SBF Quality and attention to detail make these sway bars the choice for serious performance. These elephant racing lightweight bars are hollow. They are half the weight of competing bars of equal stiffness. Bearing blocks, drop links, and sway bar arms are cnc machined from aircraft-quality 6061-t6 aluminum for its high strength/weight ratio. Fully adjustable front and rear drop links eliminate suspension preload. Oversized, precision teflon-lined rod-ends provide long life, smooth operation, and high-reliability. Adjustable drop-link arm connection design provides infinitely adjustable sway bar stiffness rate and makes it easy to fine-tune your car's handling for various track conditions and driving s...(choose a part on the right to read more) General Fitment911 1965-69911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 914 1970-76
$619.99
Make a selection FE02 Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There’s no worse feeling then watching your car burn to the ground without the ability to do anything about it. Unlike most fire extinguisher mounts available, all of rennline’s mounts install directly to the factory seats and do not compromise seat travel or leg room in anyway. Constructed from aircraft grade aluminum and meets all requirements for racing series or other organized track events. Designed to be used with most standard 2.5lb fire extinguishers, all hardware and installation instructions are included. Available for both power and manual seats. Fire extinguisher not included. General Fitment911 1994-98911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 944 1989-91 944 1985-88 944 1982-85 968 1992-95
$163.90
Make a selection ER2071600 Elephant racing low-friction control arm mounts allow for free control arm movement, eliminating any potential for binding. Elephant racing corrected a key factory design limitation:our mounts self-align in all axis, becoming collinear to avoid binding as the arm moves through its range of motion. The low-friction control arm mounts self-align in both the horizontal and vertical planes. The result is collinear front and rear mounts delivering smooth non-binding action. You get superior performance and a smoother ride. Kit includes everything required to upgrade one car. Factory rear mounts are replaced with our self-aligning mounts. Factory front mounts are retained and augmented with self-aligning washers. ...(choose a part on the right to read more) General Fitment911 1965-69911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 914 1970-76 912 1965-69
$225.00
Make a selection M01BRRS Rennline’s rsr style stainless steel engine mount cross-bar gives your engine compartment a vintage racing look, and is much stronger than the factory original, which was made out of mild steel. Engine removal is not necessary for installation. Note: this is a new design that now features top and bottom flanges replicating the factory rsr race cars with gusseted mounting points built to withstand extreme horsepower and race abuse. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1965-69 911 1970-73
$225.95
Make a selection MSPP017 These Carrera side stripes give your Porsche a great presence on the street! An original dealer installed item and factory equipment, these stripes look great on vintage cars and gives new Porsche a retro-racing touch. They are easy to install using a little soapy water and masking tape guide line. Stripes are 76.5 inches long. Sold as a set of two, one for each side of your car. General Fitment911 2005-08911 1998-05 911 1994-98 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94 911 1965-69
$75.00
Make a selection SP043F What good is more horsepower if it isn't transferred to the ground? The clutch is the main link between the power your engine produces and the transmission, but all too often it is also the weak link. Many stock clutches simply will not last under harsh driving conditions or continual hard launches. When a car is making more horsepower than stock the factory clutch is under even more strain. This can cause premature clutch wear and costly repair bills. Spec clutch solves this problem with their line of performance clutches. With increased surface area spec clutches give your transmission more 'bite' while increasing reliability and performance. General Fitment911 1970-73911 1974-77 911 1978-83 911 1984-86
From $799.95
Make a selection FVD10397591 The h11 bolt (wmc7 and wmc6) is a high quality, aircraft standard fastener. Under racing conditions, we suggest that the h11 bolts be changed periodically. General Fitment944 1982-85944 1985-88 944 1989-91 911 TURBO/GT2 2001-05 911 1994-98 968 1992-95 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69
$29.70
Make a selection MSPP018 These side stripes give your Porsche a great presence on the street! An original dealer installed item and factory equipment, these stripes look great on vintage cars and gives new Porsche a retro-racing touch. They are easy to install using a little soapy water and masking tape guide line. Stripes are 76.5 inches long. Sold as a set of two, one for each side of your car. General Fitment911 2005-08911 1998-05 911 1994-98 911 1965-69 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73
$75.00
Make a selection MSPP020 These side stripes give your Porsche a great presence on the street! An original dealer installed item and factory equipment, these stripes look great on vintage cars and gives new Porsche a retro-racing touch. They are easy to install using a little soapy water and masking tape guide line. Stripes are 76.5 inches long. Sold as a set of two, one for each side of your car. General Fitment911 2005-08911 1998-05 911 1994-98 911 1970-73 911 1965-69 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$75.00
Make a selection MSPP021 These side stripes give your Porsche a great presence on the street! An original dealer installed item and factory equipment, these stripes look great on vintage cars and gives new Porsche a retro-racing touch. They are easy to install using a little soapy water and masking tape guide line. Stripes are 68 inches long. Sold as a set of two, one for each side of your car. General Fitment911 2005-08911 1998-05 911 1994-98 911 1970-73 911 1965-69 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$75.00
Make a selection MSPP024 These side stripes give your Porsche a great presence on the street! An original dealer installed item and factory equipment, these stripes look great on vintage cars and gives new Porsche a retro-racing touch. They are easy to install using a little soapy water and masking tape guide line. Stripes are 76.5 inches long. Sold as a set of two, one for each side of your car. General Fitment911 2005-08911 1998-05 911 1994-98 911 1970-73 911 1965-69 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$75.00
Make a selection OSG915 Os giken super lock limited slip diferential for 43 spline type 915 and type 930 gearbox equipped cars. General Fitment911 1978-83911 1970-73 911 1974-77 930 1975-77 911 1984-86
$2,380.75
Make a selection MSPP023 These side stripes give your Porsche a great presence on the street! An original dealer installed item and factory equipment, these stripes look great on vintage cars and gives new Porsche a retro-racing touch. They are easy to install using a little soapy water and masking tape guide line. Stripes are 76.5 inches long. Sold as a set of two, one for each side of your car. General Fitment911 2005-08911 1998-05 911 1994-98 911 1970-73 911 1965-69 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$75.00
Make a selection MSPP019 These side stripes give your Porsche a great presence on the street! An original dealer installed item and factory equipment, these stripes look great on vintage cars and gives new Porsche a retro-racing touch. They are easy to install using a little soapy water and masking tape guide line. Stripes are 76.5 inches long. Sold as a set of two, one for each side of your car. General Fitment911 2005-08911 1998-05 911 1994-98 911 1970-73 911 1965-69 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$75.00
Make a selection SP043H Spec stage 2+ clutch Porsche 911 3.2l Carrera 97-86 General Fitment911 1970-73911 1974-77 911 1978-83 911 1984-86
From $699.95
Make a selection SP043 What good is more horsepower if it isn't transferred to the ground? The clutch is the main link between the power your engine produces and the transmission, but all too often it is also the weak link. Many stock clutches simply will not last under harsh driving conditions or continual hard launches. When a car is making more horsepower than stock the factory clutch is under even more strain. This can cause premature clutch wear and costly repair bills. Spec clutch solves this problem with their line of performance clutches. With increased surface area spec clutches give your transmission more 'bite' while increasing reliability and performance. General Fitment911 1970-73911 1974-77 911 1978-83 911 1984-86
From $649.95
Make a selection MSPP022 These side stripes give your Porsche a great presence on the street! An original dealer installed item and factory equipment, these stripes look great on vintage cars and gives new Porsche a retro-racing touch. They are easy to install using a little soapy water and masking tape guide line. Stripes are 76.5 inches long. Sold as a set of two, one for each side of your car. General Fitment911 2005-08911 1998-05 911 1994-98 911 1970-73 911 1965-69 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$75.00
Make a selection 100211032SET These pipes are for racing use and are manufactured in europe by dansk. Each dansk quality exhaust part offers the reliability and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany and a trusted name in Porsche air-cooled tuning. These race pipes are manufactured to the highest of European standards from painted galvanized steel and connect the heat exchangers to the muffler. An example is our complete kit, part # FVD11191116. Features: painted galvanized steel. Reduces backpressure for increased performance and sound. European made by dansk. Sold as a set. 1 necessary per car. Please note: these pipes are shown in the last ...(choose a part on the right to read more) General Fitment911 1970-73
From $352.00
Make a selection 071710995 Sitzschale aus carbon-gewebe cfk, schockabsorbierender schaum, spezielle gurtdurchfuhrung fur hans-systeme, gurtdurchfuhrung fur 4-, 5- oder 6-punkt-gurt, kopfprotektor, hans protection, schwer entflammbare bezugsmaterialien, zertifiziert nach fia 8862-2009 (advanced racing seat), fia homologation 10 jahre, pad-kit m fur mittelgrosse fahrer (individuell anpassbar), gesamtgewicht (schale, polster, schrauben und adapter): ca. 25,7 kg.
$8,745.00
Make a selection 10010303204 - 3.2 l for increased horsepower and torque.* - genuine mahle forged pistons with deeper valve pockets. - genuine mahle steel (st52) nikasil coated cylinders.** - piston pin bore is off center (deaxiated) for factory quiet operation. - 10.3:1 compression. - 98 mm big bore. - 22x58 racing wrist pins - 70.4 stroke. - made in Germany by mahle gmbh. - piston rings installed directly on the pistons for ease of installation. - complete set with cylinders, pistons, rings, wrist pins and clips. - kit weighs 21.03 lbs. (9.54 kg). Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high thermal resista...(choose a part on the right to read more)
$9,693.51
Make a selection 115900944020CS Double spring suspension (racing) for 924 only for 20mm spring strut mounting this sport suspension was tuned and tested for racing use only (hockenheimring.net). Perfect handling, recommended for race and clubsport. Not for street use (racing suspension). The lowering is adjustable (30-70mm front and 30-60mm rear). By using springs at the rear axle instead of torsion bars you improve extreme the handling of your car. By removing the rear torsion bars is the weight saving approximately 25kg.
$2,633.40
Make a selection 240991352GS Pagid yellow rsl 29 are from the rsl line of endurance racing brake pads. They are a medium friction coefficient racing compound with long pad and disc life, and are easily bedded in. Rsl 29 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and offer excellent release characteristics. Rsl29 pads offer low heat conductivity and work well with abs systems. They offer excellent modulation and controllability. They offer lower disc wear rates and are fade resistant up to a temperature of 650*c (1,202*f). Applications include: club racing, track days, touring cars, prototype endurance racing and GT cars. Features at a...(choose a part on the right to read more)
$654.50
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |